Electronics Grade Vacuum Tray Dryer Machine For Contamination Free Component Drying

The electronics grade vacuum tray dryer is designed for components that must be dried cleanly. Wet parts are placed in trays, a vacuum pump creates a negative pressure vacuum environment, and a heating medium is circulated between the jacket and the pipes for heat conduction drying. The evaporated moisture is removed by the vacuum pump.

Because the chamber is isolated from the external environment and no impurities are introduced during drying, the process protects sensitive components from contamination while drying gently at low temperature. The lowered boiling point under vacuum also makes the components heat evenly, which helps protect delicate parts.

Note: The above data is for reference only. If you have any special requirements, our factory can provide design and consultation services.

Components are loaded into trays inside the sealed chamber and the vacuum pump lowers the internal pressure, so the boiling point of any moisture or solvent falls and drying proceeds at low temperature. A heating medium circulated between the jacket and the pipes supplies heat by conduction, and the evaporated moisture is drawn out by the vacuum pump. Because the chamber stays closed and no impurities are introduced, the components dry cleanly without being exposed to the surrounding environment.

1. Wet material is placed into trays inside the drying chamber.
2. The vacuum pump creates a negative pressure vacuum environment.
3. A heating medium is introduced between the jacket and the pipes for heat conduction drying.
4. The moisture evaporated from the material is removed by the vacuum pump.
5. Recovered solvent is condensed and collected through a condenser and a buffer tank.

• Closed chamber isolated from the external environment for contamination-free drying.
• No impurities are introduced during the drying process.
• Low-temperature drying under vacuum protects heat-sensitive components.
• Even heating through jacket and pipe conduction.
• Static tray drying protects delicate parts from damage.
• Sterilization before drying, meeting GMP requirements where required.

It suits the electronics industry for clean, low-temperature drying of components and is also used in the pharmaceutical, chemical and food industries where contamination-free drying is required.

• Electronics components that require clean drying.
• Pharmaceutical, chemical and food industries.
• Heat-sensitive parts that must stay contamination-free.